The Pink Whisk Brilliant Baking Step-by-Step Cake Making by Ruth Clemens Page B
Book: The Pink Whisk Brilliant Baking Step-by-Step Cake Making by Ruth Clemens
Read Free Book Online
Authors: Ruth Clemens
Ads: Link
you have a loose-bottomed tin, draw around the base and cut out exactly on the line. Otherwise draw around the tin and cut out just inside the line.
3. Lightly greasing the tin before adding the paper will help it stick in position. Fit the collar around the inside of the tin: the crease should sit directly at the bottom of the tin with the snipped part sitting on the base. Finally add the circle to the base and you’re ready to bake.
Lining a loaf tin
1. To line a loaf tin, cut a rectangle 2.5 times the open width and 1.5 times the length.
2. Push the paper into the loaf tin to roughly mark where the bottom corners of the tin are. Remove and cut diagonally from the very corner of the paper to the corner crease mark. Repeat for each of the corners.
3. Set the paper into the tin and cut away any excess at the corner folds and around the top. As with round tins, greasing the loaf tin lightly will help the paper stay straight in the tin!
TIP
If you bake regularly then having a supply of paper loaf liners and pre-cut baking paper circles is great and will take the faff out of cutting your own!
TIP
Greasing sprays, also know as cake release, are fairly easy to get hold of now and make greasing tricky tins like Bundts super easy.
Preparing a shaped Bundt tin
It’s infuriating when you’ve baked a cake and then can’t get it out of the tin (except with a chisel!).
A really good greasing will help when it comes to turning out a cake and for shaped tins such as a Bundt it’s important to get into every nook and cranny. Once baked the cake should be cooled a little in the tin before turning out (approx. 30 mins). This allows the structure of the cake to firm up so it doesn’t fall apart. It should then be turned out onto a serving plate or cooling rack and left to cool completely. Don’t leave it to cool fully in the Bundt tin otherwise it’ll never come out!
Troubleshooting
My cake has come out wonky!
Unevenly risen cakes can happen for a number of reasons. For me it’s most likely that the oven shelf isn’t level – the first step is to check! They can also rise unevenly if the raising agent (bicarbonate of soda or baking powder) is old and losing it’s efficacy or hasn’t been dispersed through the cake mixture evenly.
My mixture has curdled…
It’s important that all the ingredients are at room temperature when working them together. If the butter or eggs are too cold it can result in a curdled mixture. Add the eggs slowly, beating well after each addition, to allow the mixture to aerate rather than becoming a liquid sloppy state. Mix, mix, mix is the key to avoiding the dreaded curdle! Adding something very acidic to a cake mix such as lemon juice will cause a curdle. At the end of the day don’t worry too much – it’s best avoided if you can but if not your cake will still turn out pretty well!
My cake has a volcano effect on top
The oven might have been too hot or the cake too high up in the oven – this can also be the cause of cakes burning on the top. The crust has baked and set before the cake mixture in the centre, and as it bakes through the mixture expands. As it has nowhere else to go it bursts through the top, creating the volcano dome effect. It’s a good idea to keep an eye on your cakes whilst baking, peeking through the oven door if you can and if they’re beginning to brown too much cover with a sheet of foil for the remaining baking time, or dropping the oven temperature just slightly. Domed cakes can generally be rescued by slicing off the top and disguising with icing.
My cake top has a crunchy ‘skin’
This will happen if the butter and sugar weren’t worked into the cake mixture well enough. The butter and sugar can end up on the top of the cake as you scrape the bowl clean of cake mixture. Make sure your mixture is thoroughly even before filling your cake tin.
Disaster! My cake has sunk in the middle
Cakes sink when they have too little flour or too many eggs in the
3. Lightly greasing the tin before adding the paper will help it stick in position. Fit the collar around the inside of the tin: the crease should sit directly at the bottom of the tin with the snipped part sitting on the base. Finally add the circle to the base and you’re ready to bake.
Lining a loaf tin
1. To line a loaf tin, cut a rectangle 2.5 times the open width and 1.5 times the length.
2. Push the paper into the loaf tin to roughly mark where the bottom corners of the tin are. Remove and cut diagonally from the very corner of the paper to the corner crease mark. Repeat for each of the corners.
3. Set the paper into the tin and cut away any excess at the corner folds and around the top. As with round tins, greasing the loaf tin lightly will help the paper stay straight in the tin!
TIP
If you bake regularly then having a supply of paper loaf liners and pre-cut baking paper circles is great and will take the faff out of cutting your own!
TIP
Greasing sprays, also know as cake release, are fairly easy to get hold of now and make greasing tricky tins like Bundts super easy.
Preparing a shaped Bundt tin
It’s infuriating when you’ve baked a cake and then can’t get it out of the tin (except with a chisel!).
A really good greasing will help when it comes to turning out a cake and for shaped tins such as a Bundt it’s important to get into every nook and cranny. Once baked the cake should be cooled a little in the tin before turning out (approx. 30 mins). This allows the structure of the cake to firm up so it doesn’t fall apart. It should then be turned out onto a serving plate or cooling rack and left to cool completely. Don’t leave it to cool fully in the Bundt tin otherwise it’ll never come out!
Troubleshooting
My cake has come out wonky!
Unevenly risen cakes can happen for a number of reasons. For me it’s most likely that the oven shelf isn’t level – the first step is to check! They can also rise unevenly if the raising agent (bicarbonate of soda or baking powder) is old and losing it’s efficacy or hasn’t been dispersed through the cake mixture evenly.
My mixture has curdled…
It’s important that all the ingredients are at room temperature when working them together. If the butter or eggs are too cold it can result in a curdled mixture. Add the eggs slowly, beating well after each addition, to allow the mixture to aerate rather than becoming a liquid sloppy state. Mix, mix, mix is the key to avoiding the dreaded curdle! Adding something very acidic to a cake mix such as lemon juice will cause a curdle. At the end of the day don’t worry too much – it’s best avoided if you can but if not your cake will still turn out pretty well!
My cake has a volcano effect on top
The oven might have been too hot or the cake too high up in the oven – this can also be the cause of cakes burning on the top. The crust has baked and set before the cake mixture in the centre, and as it bakes through the mixture expands. As it has nowhere else to go it bursts through the top, creating the volcano dome effect. It’s a good idea to keep an eye on your cakes whilst baking, peeking through the oven door if you can and if they’re beginning to brown too much cover with a sheet of foil for the remaining baking time, or dropping the oven temperature just slightly. Domed cakes can generally be rescued by slicing off the top and disguising with icing.
My cake top has a crunchy ‘skin’
This will happen if the butter and sugar weren’t worked into the cake mixture well enough. The butter and sugar can end up on the top of the cake as you scrape the bowl clean of cake mixture. Make sure your mixture is thoroughly even before filling your cake tin.
Disaster! My cake has sunk in the middle
Cakes sink when they have too little flour or too many eggs in the
Similar Books
